MENU
- Home

- File Repair

- Quickbooks Data Recovery

- Quickbooks Enterprise to Pro

- Exchange Repair

- File Conversion

- File Formats
- Products
- Services

- Newsletter

- F.A.Q.'s

- Contact Us

 
 

Quickbooks Corrupt or Damaged File Repair/Recovery

We offer the following services to users of QuickBooksฎ:

  • Data Recovery including damaged media (backups made on bad floppy disks)
  • Password Recovery
  • Conversion or update of QuickBooks files to later versions

    If you're having problems with your QuickBooks data, we can fix it. Guaranteed!

Quickbooks Damaged or Corrupted File Recovery Rates

Quickbooks Expedited Data Recovery:

  • Turnaround time is 8-12 hours.
  • US$449 flat fee
  • Guaranteed success, or no charge
        Buy Quickbooks Expedited Data Recovery Service
(using PayPal)

Quickbooks Standard Data Recovery:

  • Turnaround time is 48 hours
  • US$275 flat fee
  • Guaranteed success, or no charge
        Buy Quickbooks Standard Data Recovery Service
(using PayPal)
If you don't see your problem listed above and want to know if we can fix it before sending your data, please send us an email describing your problem to support@filerepair.net and we will get back to you ASAP.
To send us your data file for a Free no-obligation quote, please use the link below
Free QuickBooks Data Recovery Evaluation


Recovery Procedure:

  1. After paying for the service, we will send you FTP instructions to send us the corrupted or damaged data file for recovery. For Quickbooks 2006 and higher recoveries, it is important to send us both the QBW and TLG file as well as ANY older backup of the Quickbooks data file (QBW or QBB).
  2. We will analyse your files and send you an analysis report detailing exactly what can be recovered and what cannot be recovered. (In most cases we can recover everything without any data loss).
  3. At this point you can choose either to go ahead with the recovery or cancel the recovery request.*
  4. If you cancel the request, your payment will be refunded in full.
  5. If you decide to go ahead with recovery, you will receive an email with instructions to download the recovered data file.
*Note: For prepaid customers, if your file can be repaired without any data loss, you will receive the repaired file as soon as recovery is completed. 
Error Codes - Introduction
 
Most QB error messages say Fatal or Unexpected Error and things like:
V7.0D R3P M=1153, L=133, C=43, V=28 (FFFFFFF4).

Many such codes are only useful to computer programmers. They put codes and related tests in programs to stop program crashes and make it easy to correct crash problems. Thanks to good programmers, effective quality control and extensive pre-release (beta) tests, QB usually has few bugs. Most errors relate to problems with your data or system. You can fix many of them once you understand some of this. See the table below to understand:
V7.0D This is the version of your QB program (V7=QB99).
R3P This is the maintenance Release number of your QB program. QB usually releases several free updates for each version. The releases available and the problems they fix are sometimes listed at http://www.quickbooks.com. If you have QB problems check that you are using the most current release. If not, download it. This may fix many problems.
M=1153 Module number.
L=133 Line number.
C=43 This is an error code number. We list more below. If you get repeated error codes then back up or copy your file and confirm you have a complete backup (restore it). After restoring the backup, click Windows, Closeall, File, Utilities, Verify Data and Rebuild Data.
V=28 (FFFFFFF4) Some debugging value, often in hex, that a programmer thought might be useful.
Error Codes - C =
 
 
0 This may be due to an outdated Wininet.dll file on your computer when trying to access the Internet Connection Setup. The .dll version should match or be later than your Microsoft Internet Explorer version. Run the Internet Explorer repair tool, which may detect the outdated version, or update to the latest version of Internet Explorer. In the Internet Explorer Help menu click the link pertaining to program updates.
1 For example, M=1028, L=1743, C=1,V=0 [0], in QuickBooks V5.0/R4, after a backup and restore to a new system. This may involve non-standard video settings. Check to make sure you are in a standard set (e.g. 640x480 or 800x600) and 256 colors. It also may involve custom invoice form that must be copied in addition to the data file.
3 According to one report this means the program is unable to open a Quicken file on a Mac. This should happen only on Mac versions. Free up HD space. Reopen and close the file using Quicken for the Mac. Then try again. However, a second source says this relates to QB having a full or nearly full hard drive.
9 Unable to read from an auxiliary file at the OS file system level. Copy the data file to another disk or drive. Possible damaged disk.
10 Unable to write to an auxiliary file at the OS file system level. Should only happen during backup/restore, export, mail merge or other operation which write to a data file. Free up hard disk space and try again. Possible damaged disk.
19 Unable to delete a transaction, because it is incomplete (probably data error). Happens during Condense Data. In later versions, rebuild the data file.
21 QB is trying to close a data file while the program thinks it is in the middle of recording a transaction, but probably isn't. Check to see that the last data you recorded is still in the file. Get the latest release of QB for your version.  Moving data, reinstalling, and rebuilding has no effect on this.
32 Also Error -35. The file was used in a newer version of QB and cannot be used in an older one. Each new version (and some Releases) of QB has an updated data structure. QB files can’t be used after conversion in a new version of the program.  (not used since version 4.0).
38 Unknown, but related to backup, as in
V7.0D R1 (M=1352 L=968 C=38 V=30 (FFFFFFE2)
43 Error reading a transaction or memorized transaction. This can be caused when QB is trying to navigate a report or report-like data, or by data damage. If restarting QB and repeating the action causes the error again, it is probably damaged data. Then rebuild. C=43 also occurs when printing 1099 and W2 forms (V6.OD R1 [M=1477, L5203, C=43, V=2(2)). If the font looks like Russian letters it often relates to losing the OCR-A font is by installing TurboTax (also from Intuit). You must delete all OCR-A fonts and reinstall QB.

 

44 Error writing a transaction. Possible data damage or out of memory. Restart Windows and try again. If error persists, Rebuild.
47 Trying to remove a transaction from a report or report like feature. Trying to locate a transaction that has been modified, but could not find it. Harmless. Close all windows and continue. If this does not work, try Verify and Rebuild.;
51 Appeared in QB 3.0 and was described as a benign error (keep going) or: exit QB, exit Windows, and start again; verify in release 7 or later; or Rebuild data.
53 Some entry in a list should be deleted, but for some reason was not deleted. Rebuild data may work, but don't expect much. If it does not, Restore last backup. If you get this often it may be time to upgrade to a new version.

 

55, 64 The network temporarily went down. It then probably came back before it was noticed, except for QB, which cannot handle that.
88 Error writing to the QB file on the QB file level. Rebuild. If the problem persists try to free memory and try again.

 

147 Benign error ( keep working).

 

184 Unexpected Error - February report days mismatch (28 & 29)
210 Appears in files with Error C=53 (also Error 210, -210)

 

212 File has been used in later version. Comment at C=32.

 

224 QB tried to read an invalid split line for a transaction or memorized transaction. The data file may be damaged or QB may be confused. Delete the first split transaction error, in the QBWIN.LOG file.
225, 260, 265 Try Rebuild. You will probably have to call the QB Support Network.

 

304 QB could not create an image (.qbi) file, due to lack of disk space or network limitations. QB creates this file when a company file is opened and deletes it when the file is closed.

 

315 Assertion failed miscellaneous error. The program should not be here and is not sure what to do. It is used lots of places so it is hard to say how bad it is or what is the root cause. If you get it in list activities or reports it indicates a list problem. Try to Re-sort the list. It also can be low memory or conflicts with other programs. Shut down other programs & see if problems disappear. This error appears in older versions of QB and Windows.

 

339 Memory is too full to send any other message. See C=47.

 

342 Please restart QuickBooks and try again, preferably with a new data file. In Microsoftฎ Windows XP users should verify compatibility settings . Scan your system for viruses. If you are able to open other data files: rebuild your company data file without opening it . If you continue to receive the error after completing these steps, restore a backup of your company file.
387 This may be an invoice template problem. Go to Lists,  Templates, at bottom Show All in case a template is inactive. Select a template and click Open Form. Repeat until a template has an error (some templates show no name). Then close the form. In the Templates window, select the template with the error, click Templates, Edit and Default on the right. When you get "All your Header, Fields, Columns, and Footer Settings will be returned to their original default ... ", click OK. Click OK again to save changes. You should now be able to open an invoice with no error. Custom templates will need customizing again.
Error Codes - Other
 
 
117 146 Unknown Client-Specific Tax Form Print Error. Uninstall and reinstall QuickBooks.
15212 Common payroll or program upgrade problem: a shared download location mapped to an unavailable drive; file opened from a non-mapped location while Shared Download is OFF; or hard disk does not have sufficient space. Restart computer and re-map data file to network drive (see Map Network Drive). If you still have the problem Update QuickBooks from the QB File menu. Click the Options tab. Share Download OFF and then ON. Click Save. If the problem persists it is likely that a hard disk you are trying to download to does not have sufficient space.
80004003 80004005 All 8xxxxxxx numbers are Windows error codes (in hex). In QB2000 it related to an invalid pointer.error when clicking an icon in the opening splash screen.
Balance sheet out of balance This is due to data corruption. See the above File Repair procedures.
Balance sheet net income not equal to Profit & Loss net If the balance sheet is in balance, but the income on it does not match the income of the P&L, then one statement is on the Cash Basis and the other is on the Accrual Basis. Modify or Customize memorized reports, depending on the version of QB. Also Edit (File) | Preferences | Reports | Cash (or Accrual) to set the default Preference for future reports.
Chart of Accounts delete error See list item delete error below.
Cursor, letters in title bar yellow, faint, hard to see Some say the Windows color definitions change. Due to WordPerfect 6. Apparently fixed in WordPerfect 7. The solution is to exit and re-start Windows without using WordPerfect or to use WordPerfect 7.
Data from new QB version-cannot use OR Cannot upgrade some workstations for network data file This is easy to fix. Each QuickBooks version & some free interim releases upgrades data file formats so you cannot use the files with older programs. All you need is the new QB version or release. QB6 R3, QB99 R3 and QB2001 R2 upgraded file formats. The interim upgrades causes big problems for QB ProAdvisors dealing with many QB versions, releases and clients, so Intuit tries to minimize them. Note that once you upgrade a QuickBooks network data file you may not be able to get into it to upgrade all workstations. In this case open a QB Sample file in the local Intuit Program Files folder.
Erroneous credits in A/R Aging report See Unexplained Errors below.
IE (Internet Explorer problems) Installing some versions of QB try to get you to install a version of IE earlier than the one you have. You can add this to the top of the qbw.ini file for some systems and operating systems:
[Misc]
IE5Override=-1
It works
Illegal operation For example, "This program has performed an illegal operation and will be shut down. Details: QBW caused a general protection fault in QBWPR.DLL.” The Windows, Closeall, File, Utilities, Rebuild procedure may help. However, you also may get more information if you disable Dr.Watson (see top of this page). You also might uninstall and reinstall QB.
Invalid page fault For example, "QBW32 caused an invalid page fault in module QBTXN32.DLL at 017f:0042f188." See above.
Link Error Code: 00001 This appears in messages like: Link Error Code: 00001(HEX), UNKNOWN (15), linkRecNum = 48387, sibling = 48386, key (m1) = 40518, tOne = 40524, mTwo = 48378, tTwo =48382
It usually relates to transactions to be found and deleted to fix QB files.
List Item delete error The error says something like, "This account is associated with an item. It cannot be deleted." This applies to Items, Customers, Vendors, Employees, Payroll Items and the Chart of Accounts. You cannot delete such items if referenced by transactions or other items. For example, you cannot delete an account that is referenced by an Item or Payroll Item, even if no transactions reference it. You can only delete or change such items (accounts, etc.) after removing all references to them.
Map Network Drive (common problem)
Within QB
File, Open Company, Look in drop-down list - My Network Places. Double-click Entire Network and the QB file drive. Right-click the folder with it and select Map Network Drive. Select an unused drive letter, Reconnect at Logon and Finish. From the Look in drop-down list select the drive assigned, the main window, Open. the QB file name and Press Ctrl+1 for Product Information. The path in File Information : G:\QuickBooks Pro\[company name].qbw.
Map Network Drive (common problem)
In Windows
Explorer
On the Windows toolbar, right-click Start and then Explore. From the Tools menu select Map Network Drive. Click the Browse button. Click the plus signs until you locate the folder that contains the QuickBooks data file. Select the folder and click OK. Select an unassigned drive, Reconnect at Logon and Click OK. Start QuickBooks, and from the File menu, choose Open Company. From the Look in drop-down list, select the drive letter assigned, choose your company file name and Open. When the file opens, press Ctrl+1 to open the Product Information window. Look at the path under Location in File Information .The file location should be like:G:\QuickBooks Pro\[company name].qbw.
OL-2XX These errors relate to remote network/server problems (despite saying contact Intuit). QB2000 correctly says contact Financial Institution. The key is how often they occur. It may be a transient problem (delays in the Internet between you and your bank or a problem with the bank server). Try again, preferably at a "less busy" time. QB2000 OL-206 says "try again later. If it still fails, contact the financial institution.
Other program busy For example, "This action cannot be completed because the other program is busy. Choose 'Switch to' to activate the busy program and correct the problem. Doing so may result in this error message, "QBDagent.exe, MrtInitialize failed - 7." Clicking OK makes this go away for the moment. It relates to QB Marimba automatic background download capability, criticized as an invasion of privacy. Remove QBDagent from the Windows startup menu. Turn off automatic downloads in QB.
Printing Make sure the printer works with Start | Settings | Printers | right click printer | Properties, Print Test Page (lower right). Then check print spool setting. If this fails install a new printer driver from Windows or e Internet sites. If you still have problems check File | Print Setup and Print Forms settings in QB. Also see errors 117 and 146 and next.
QB freezes when printing You may have a Print Reports or Print Lists window ( with a printer name & Portrait/ Landscape, etc.) off the screen. QB does not respond to a mouse after you print or Printer Setup. Rebuild has no errors and other programs run OK. The W2000 Task Manager does not show QB as Not Responding. A Processes view shows 9%+ idle and no CPU time for qbw32.exe. Reports that Preview will Print. The solution: hold down Shift & click File, Printer Setup. Print Reports, etc., screens are centered on the screen. Move them slightly by dragging the top blue bar to create a new on-screen default.
Server busy QB does not release its file lock as soon as you exit, so anyone trying to use the file too soon gets this message. To avoid it use the Task Manager (Ctrl-Alt-Del) and Process to End these processes: Axelbridge, Axelbridge1, QBDagent, QBDagent, QBupdate and QBserver . Alternatively, open a Sample or dummy file before exiting. A QB2002 fix was to be available by 2/15/02.
Spool32 This may occur when printing. Someone suggested typing Ctrl -1 in QB to get version and miscellaneous information. However, it probably relates to a printer not being properly set up.
There was a problem loading registration support c:\windows\temp\{2b02f82e-a9b9-458c-80e5-3ea8c0de8471} \mfc70.dll Error... This occurs if you are use Microsoft Windows 98 First Edition and did not install Microsoft Active Accessibility.
Trans # This appears in messages like: Trans # Type Date Num Name Payroll Item Wage Base Amount
37922 Paycheck 03/30/2001 9093 ... (cont.)

It usually relates to transactions that must be found and deleted to fix QB files.
Unexplained Errors Many unexplained errors relate to corrupt data, which you (or we) can usually fix. See File Repair Procedures and Comments below.
W32.Blaster.Worm "Error C=342," "RPC Server is unavailable," or "QBCenters could not find a critical file" Run a full dscan with your anti-virus program, after updating it.
File repair procedures
 
If your balance sheet is out of balance or QB ends with an error message you have a damaged QB file. You can easily repair some damage.

Enter Windows, Closeall, File, Utilities and Rebuild. That usually solves problems. If you discover problems right after upgrading, STOP. Go back and rebuild and repair the file in the earlier version as much as you can. Later versions may fix problems that earlier versions cannot fix, but they also may make them worse. Upgrades rarely work if there are any errors and you may soon be unable to open a file with errors if you keep using a damaged file.

PLEASE FIRST MAKE A COPY (OR TWO) OF YOUR QB FILE. If the problem is not fixed then delete QBWIN.LOG in the QB program folder. If the backup required by Rebuild causes a fatal error copy the data with Explorer after closing QB. Then run Rebuild while holding down the control key. This does the Rebuild without backup. After the Rebuild, check the new QBWIN.LOG with WordPad to see if there are errors like these:

=====================* BEGIN REBUILD LOG *====================
Rebuilding data, file name: J:\My Documents\Quickbooks\Boat.QBW
Tue Mar 06 12:46:41 2001

Error: Verify Account list. Duplicate name encountered. Name: Accounts
Payable Records 70 (4) and 136 (5).
To fix, edit this element in the list and change its name.
Error: Verify Account list. Duplicate name encountered. Name: Accounts
Receivable Records 74 (7) and 137 (8).
To fix, edit this element in the list and change its name.
Error: Verify Account list. Duplicate name encountered. Name: Payroll
Expenses Records 68 (86) and 1 (87).
To fix, edit this element in the list and change its name.
Verify TARGET: Major not followed by minor. Rcrd = 105917.
Type: paycheck txn#: 08905 date: 01/26/2001 doc#: 102982
Distrib accnt: Uncategorized Expenses $: -197.68

=======================* END REBUILD LOG *=======================

The above messages indicates chart of accounts duplicates. Go to the chart. Make sure Show All is checked if you have inactive accounts. Then edit one of the affected accounts and change its name.

The next error line is in accounts receivable. Change a duplicate to something like 1 and save it. Then edit it again, giving it the same name as the other accounts receivable. When it asks you if you want to merge them, say yes. Do the same with the others. If you don't mind having two A/R, A/P and Payroll Expenses, just name them something slightly different and do not bother to merge.

If any entries are bad use the Audit Trail or Find to find THE FIRST bad entry. Write down its details before you delete it, so you can enter it later. Deleting one entry may let QB Rebuild fix many entries, so only delete the first bad entry. Deleting several entries at once may make things worse by deleting later undamaged entries (even though QBWIN.LOG says they are bad). Repeat this procedure until there are no errors.

If you have a payroll error in a recent version of QB chose Run Payroll Checkup in the Employees menu. On the Payroll Data Review page of the Payroll Setup, click Continue. QB first summarizes actual and possible problems with your employee setup & your payroll item setup. When it does wage and tax verification, QB displays a progress bar, indicating it is scanning your payroll data. When scanning is complete results appear on the Wage and Tax Verification Results page.

If you are having problems you should almost never delete list items, as opposed to transactions. They very rarely contain errors & you may need them for hidden QB audit trail and other transactions. Yes, I know QB should not let you delete a list item used or referenced elsewhere in QB, but I know many cases where QB let itself to get corrupted this way.

In some cases errors do not show up in QBWIN.LOG until you rebuild, so do this. If none of this works either start a new file or pay Intuit to see if they can repair it. Once the Intuit Developer version (QB2002) helps create many more QB Add-ons we should be able to do more about repairing and condensing QB files.

You can only upgrade an error free file. Many errors that occur on conversion relate to hidden damage in files that only appears when you upgrade. If your cannot read your partly converted data file you can usually use your old QB to restore the backup QB forces you to make before upgrading. Rebuilding this file, with the old version, fixes many problems that show up on upgrading.

You also can import from Quicken, but not export to it. You must give later versions or releases that are not file format compatible permission to upgrade the format (say YES or OK). They make you make a backup in the old format. The QB2001 R2 format had to be changed to fix a bug, as Intuit knows such changes cause problems when clients and accountants cannot read each other's files. This made QB2001 R1P unable to read R2P and later files. You also can Restore a Backup copy of the file, like the one you had to make when you upgraded, provided it is not damaged. alternatively, you can submit your file for data recovery by filling a request at http://recovery.filerepair.net


 

Other Recoverable Quickbooks Error Codes :

An error occurred when QuickBooks tried to access the company file

The codes below are the common Quickbooks Error codes that are repairable. This is not a comprehensive list and in most cases we can recover files with other related error codes.

QB is attempting to open this Company file. Before you can open the company file from your computer you must first open the company file on the computer where the company file is located. (-6177,0)
C=224 error while backing up, verifying, or rebuilding a file

An error occurred when QuickBooks tried to access the company file...(-1,0)

"Unexpected Error C=422" followed by "An error occurred when QuickBooks tried to open the company file. Please try again...(-1,0)"

Error: C=51 "Can't find txList"

Error: C=224 error while backing up, verifying, or rebuilding a file

Error: "Unexpected Error: An error has occurred in QuickBooks. C=342." followed by "QuickBooks has encountered a problem and needs to close."

Error: "C=0"

Error: "C=79" working in QuickBooks or using the Verify Data or Rebuild Data utilities

Error: C=387

Error: "C=55: Form field types don't match"

Error C=88 and QuickBooks stops responding when memorizing a report containing more than 6349 items

Error (-6177,-0)

Error received when attempting to update: "C=330"

Error: "An error has occurred in QuickBooks. ... C=239"

Error: "An error has occurred in QuickBooks... C=342" followed by "Qbw32: This program has performed an illegal operation..."

Error: "Assertion failed: program c:\programfiles\ intuit\quickbookspro \qbw32.exe File: d:\qb187\source\wpr\src\fntcach.cpp line: 295"


"QuickBooks is unable to complete this operation and needs to restart. QuickBooks will restart automatically."
"-6154,0", "-6108,105", "-6000, -305", error 20020 81695, 08328 07843, 16738 69980, 16438 56631, 00000 16431, 16361 56670 and 16617 91519
Please restart QuickBooks and try again. If you continue to experience this error, please note the C= value and contact technical support.
The user name "Admin" is not a recognized user. Please check the spelling or ask your Quickbooks Administrator to set you up as a new user and try again.

Quickbooks Damaged or Corrupted File Recovery Rates

Standard Data Recovery:

  • Turnaround time is 48 hours
  • US$299 flat fee
  • Guaranteed success, or no charge

Expedited Data Recovery:

  • Turnaround time is 12 hours.
  • US$425 flat fee
  • Guaranteed success, or no charge

QBWRecovery Standard Recovery Service

(using PayPal)
$299.00

To request Expedited service with a turnaround time of 12 hours, click here.


HOW IT WORKS:
1. After paying for the service, you will be sent and email with FTP details to send us the file.
2. We will analyse your file and send you an analysis report detailing exactly what can be recovered and what cannot be recovered. (In most cases we can recover everything without any data loss).
3. At this point you can choose either to go ahead with the recovery or cancel the recovery request.
4. If you cancel the request, your payment will be refunded in full.
5. If you decide to go ahead with recovery, you will receive an email with information to download the recovered file.

Note: For prepaid customers, if your file can be repaired without any data loss, you will receive the repaired file as soon as recovery is completed.

Applies to:
Quickbooks Basic 2006, 2005, 2004, 2003, 2002, 2001, 2000, 99
Quickbooks Pro 2006, 2005, 2004, 2003, 2002, 2001, 2000, 99 
Quickbooks Pro 2006, 2005 for Mac (also , 2004, 2003, 2002, 2001, 2000, 99)
Quickbooks Premier Editions 2006, 2005, 2004, 2003, 2002, 2001, 2000, 99
Quickbooks Enterprise Solutions 
Quickbooks Online Edition 
Quickbooks Simple Start 2006, 2005, 2004, 2003, 2002, 2001, 2000, 99

USA, UK or Canadian Versions.

QBFC Error codes

Error: "Runtime error -91," "Runtime error -2147418105," "Runtime error: 429 Active X component cannot create object," "Runtime error ID = 1AD," or "Runtime error ID = 1CE" 
Error "Internet Explorer cannot display the webpage" when trying to access QuickBooks Help 
Error: "Your user account for Windows was created with Restricted access to system resources. This will prevent QuickBooks from operating properly..." 
Error: "The application or DLL c:\program files\intuit\QuickBooks\UI.DLL is not a valid windows image. Please check this against your installation diskette" 
Why do I receive the message, "Server Busy: This action cannot be completed because the [name of company file] program is not responding..."while trying to Tax Link into TurboTax? 
Error: "Your new add-in product is trying to install a menu item as its own descendant into QuickBooks. Please notify the add-in vendor..." 
Error: "Could not set the colSpan property. Invalid property value. Enter a value between 1 and 1000." 
Error: "Error 16026" 
Message: "You cannot change the sublevel while the list is sorted." 
Error: "Client 32: Out of disk space writing file qfn3253.tmp to server [server name]. Try deleting some files before continuing..." 
Warning: "QuickBooks has found an invalid field string, [field name], in the QuickBooks letter that you selected. Edit the letter and verify ...." 
Errors received when opening company data file: "C=43" or "C=88" 
Messages: "Waiting for company file." or "Company File in Use—Please Wait." 
Error: Fatal or unexpected error C=88 when using QuickBooks 
Message: "Your data contains duplicate list elements. Please view QBWIN.log located in your program directory for a list of the duplicate elements." 
Error: "An error has occurred in QuickBooks... C=342" followed by "Qbw32: This program has performed an illegal operation..." 
Error: "Unexpected Error: An error has occurred in QuickBooks. C=342." followed by "QuickBooks has encountered a problem and needs to close." 
Error: "C=44" 
Error: "Error: Verify Master: Invalid (non-zero) key. Master = [#], key is [#]." 
Error: "This is not a QuickBooks data file. Check to ensure path and file name of the QBW file are correct" 
Message: "Some of the selected transactions were created before the Accountant's Copy and cannot be cleared or uncleared" 
Error Message: "The drive you specified is not valid. Please specify a different drive in the location field." 
Message: "The QuickBooks Administrator is editing the user information for user (Admin). You can try to log in as a different user." 
Message: "Your data has not been restored." 
Error received when attempting to update: "C=330" 
Message: "File cannot be opened because it was not completely updated. Restore the backup" 
Error C=53 
Receiving an error message when attempting to sign up for QuickBooks Payroll or view browser-based pages 
Warning: "You've reached the limit of rows in this table." 
Message: "This name is already being used. Would you like to merge them?" 
Message: "You must have administrator rights to install QuickBooks on a system running Windows NT." 
Error: "You tried to specify that you no longer want to synchronize with a particular QuickBooks list. Once you select a list..." 
Message states that an item cannot be deleted because it is used in transactions, though a QuickReport is blank 
Message: "QuickBooks will now copy your bitmap into the QuickBooks data directory" 
Errors: "Run time error 91" or "Could not back up timer file. Please make sure the media is in the drive" 
Error: "Run Time Error 94 Invalid Use of Null" 
Message: "You are restoring to a removable drive with (xxx) amount of free space." 
Error: "Error 3315 ..." followed by "Data Import Failed" 
Message: "Sorry, there is no Tools Navigator." 
Error: "QBWIN32 is linked to missing export file MFC42.DLL" (or other errors referencing MFC42.DLL) 
Error: "The drive you specified is not ready." 
Error: "IPF in module unknown" or "Elcore.dll" 
Error: "QBW32 caused an IPF in module ui.dll" 
Error: "QBW32.exe can't load at desired address and is not re-locatable - please use a program compatible with this Windows version..." 
Error: "qbw32.exe, entry point not found: the procedure entry point ?XXXXXX@@XXXXXX@@XXXXX@@XXXXX could not be located in dynamic link library..." 
Error: "C=379" 
Why am I getting the warning, "This file was created with the Canadian version of QuickBooks", when opening a data file? 
Handling Error Messages Combined with Problems Launching QuickBooks or Accessing the Data File 
Message: "vb script - Out of Memory" 
Error: "Error 407" 
Error Message: "C=22" 
Backup will not restore 
Message: "This name is already in use. Accountant cannot merge with pre-existing list items." 
Error Message: "This transaction is a result of condensing past transactions. This type of transaction cannot be edited." 
Error: "QuickBooks Pro Timer - Run-time error 7. Out of memory." 
Importing an accountant's changes after updating the data file to a newer version or release of QuickBooks? 
Error: "Error on line 'XXX' : can't record invalid transaction" 
Error messages attempting to access navigators 
Error messages when starting QuickBooks 
Error: "Update Error 20006: The content channel plugin received a 'signon user' response error from the content server." 
Error: "Too many transactions in group. Restrict date range or use filters to limit the number of transactions." 
Message: "You need to login as QuickBooks Administrator to proceed. Please enter the admin (owner) password for the company." 
Message: "Invalid Account Number" 
Message: "Tax line obsolete or set to an inactive tax form." 
Message: "In order to make changes to the online information for this payment, you need to have exclusive use of the online banking features. Do you want to acquire exclusive use of the online banking feature now?" 
Error: "C=272" 
Error: "QBW32 caused an IPF in module qbwin32.dl." -OR- "QBW32 caused an IPF in module unknown." 
Error: "Type mismatch error code 13" 
Error: "GPF in qbci.dll (or qbci32.dll)" 
Warning: "B Check failed, node = (XXX) error = (XXX)" 
Message: "The drive you specified is not valid. Please specify a different drive in the 'location' field." 
Error: "Unable to find the backup file on that disk. Please select it from the following dialog" 
Error: "QBW32.EXE - Ordinal Not Found. The ordinal 176 could not be located in the dynamic-link library file, Oleaut32.dll." 
Error: "An error has occurred in the script on this page [Line 74, Line 75, or Line 79] char 2" 
Error: "C=43" 
Message: "Unable to find backup on that disk. Please select it from the following dialog." 
How do I resolve a QuickBooks error message that contains the value C=43? 
Why do I receive the message, "MRT initialized failed: -7" when starting the computer, or opening or closing QuickBooks? 
Why do I get the message, "This is the wrong type for this field", when trying to change the opening balance on any Balance Sheet account? 
Error: "Runtime error -91," "Runtime error -2147418105," "Runtime error: 429 Active X component cannot create object," "Runtime error ID = 1AD," or "Runtime error ID = 1CE" 
Why do I receive the message, "Server Busy: This action cannot be completed because the [name of company file] program is not responding..."while trying to Tax Link into TurboTax? 
Error: "Your new add-in product is trying to install a menu item as its own descendant into QuickBooks. Please notify the add-in vendor..." 
Error: "Error 33: A previously initiated update is still completing. Please try to update again later." 
Message: "You cannot change the sublevel while the list is sorted." 
Warning: "QuickBooks has found an invalid field string, [field name], in the QuickBooks letter that you selected. Edit the letter and verify ...." 
Message: "Your data contains duplicate list elements. Please view QBWIN.log located in your program directory for a list of the duplicate elements." 
Error: "Error: Verify Master: Invalid (non-zero) key. Master = [#], key is [#]." 
Message: "File cannot be opened because it was not completely updated. Restore the backup" 
Error C=53 
Warning: "You've reached the limit of rows in this table." 
Message: "This name is already being used. Would you like to merge them?" 
Message: "You must have administrator rights to install QuickBooks on a system running Windows NT." 
Error: "You tried to specify that you no longer want to synchronize with a particular QuickBooks list. Once you select a list..." 
Message states that an item cannot be deleted because it is used in transactions, though a QuickReport is blank 
Message: "QuickBooks will now copy your bitmap into the QuickBooks data directory" 
Errors: "Run time error 91" or "Could not back up timer file. Please make sure the media is in the drive" 
Error: "Run Time Error 94 Invalid Use of Null" 
Message: "You are restoring to a removable drive with (xxx) amount of free space." 
Error: "Error 3315 ..." followed by "Data Import Failed" 
Error: "QBWIN32 is linked to missing export file MFC42.DLL" (or other errors referencing MFC42.DLL) 
Error: "IPF in module unknown" or "Elcore.dll" 
Error: "QBW32.exe can't load at desired address and is not re-locatable - please use a program compatible with this Windows version..." 
Error: "C=379" 
Why am I getting the warning, "This file was created with the Canadian version of QuickBooks", when opening a data file? 
Handling Error Messages Combined with Problems Launching QuickBooks or Accessing the Data File 
Error: "Error 407" 
Error Message: "C=22" 
Backup will not restore 
Message: "This name is already in use. Accountant cannot merge with pre-existing list items." 
Error Message: "This transaction is a result of condensing past transactions. This type of transaction cannot be edited." 
Error: "QuickBooks Pro Timer - Run-time error 7. Out of memory." 
Error: "Invalid protection fault in module DLSADDIN.dll" 
Importing an accountant's changes after updating the data file to a newer version or release of QuickBooks? 
Error: "Error on line 'XXX' : can't record invalid transaction" 
Error messages when starting QuickBooks 
Error: "Update Error 20006: The content channel plugin received a 'signon user' response error from the content server." 
Error: "Too many transactions in group. Restrict date range or use filters to limit the number of transactions." 
Message: "You need to login as QuickBooks Administrator to proceed. Please enter the admin (owner) password for the company." 
Message: "Tax line obsolete or set to an inactive tax form." 
Error: "C=272" 
Error: "QBW32 caused an IPF in module qbwin32.dl." -OR- "QBW32 caused an IPF in module unknown." 
Error: "Type mismatch error code 13" 
Error: "GPF in qbci.dll (or qbci32.dll)" 
Warning: "B Check failed, node = (XXX) error = (XXX)" 
Error: "qbw32 caused an Invalid Page Fault in DLSADDIN.DLL" 
Error: "C=43" 
How do I resolve a QuickBooks error message that contains the value C=43? 
Why do I receive the message, "MRT initialized failed: -7" when starting the computer, or opening or closing QuickBooks? 
Why do I receive the message, "C=283" when I attempt to switch to Single-user mode or close my data file? 
Why do I receive the message, "A Fatal Exception 0E has occurred at 0028:C007C366 in VXD mrtRate(01) + 0000156A"? 
Why do I receive the error, "QBW32 caused an Invalid Page Fault in QBBROW32.DLL" when starting QuickBooks? 
Why do I receive the message, "Unsupported version of ACT!" when synchronizing contacts with ACT! 2000? 
Why do I get the error message, "QBW32 caused an invalid page fault in module QBWIN32.DLL at 0167:006e3dd4" when filtering a report for one account? 
Why am I receiving the error message, "VT Chart Error", "VTDsgdi2::Release Dc called with null hdc" or "A required resource was"? 
Why do I get the message, "This is the wrong type for this field", when trying to change the opening balance on any Balance Sheet account? 

Why do I receive the message, "Server Busy: This action cannot be completed because the [name of company file] program is not responding..."while trying to Tax Link into TurboTax? 
Message: "Your data contains duplicate list elements. Please view QBWIN.log located in your program directory for a list of the duplicate elements." 
Error C=53 
Warning: "You've reached the limit of rows in this table." 
Why am I getting the warning, "This file was created with the Canadian version of QuickBooks", when opening a data file? 
Importing an accountant's changes after updating the data file to a newer version or release of QuickBooks? 
Error: "Error on line 'XXX' : can't record invalid transaction" 
Message: "You need to login as QuickBooks Administrator to proceed. Please enter the admin (owner) password for the company." 
RTPatch Error: "Neither command line parameter specified is an existing directory." 
Error: "QBW32 caused an invalid page fault or invalid instruction in (module)." 
How do I resolve a QuickBooks error message that contains the value C=43? 
What can I do if I can't open my data file because of an error message? 
Why do I get the message, "This is the wrong type for this field", when trying to change the opening balance on any Balance Sheet account? 
How do I resolve the message "QuickBooks will run best with Service Pack 3 installed. You should quit this installation, and upgrade your system before setting up QuickBooks."? 
How do I resolve the error message "QBW32.exe Exception: Access Violation or "QBW32 caused a stack fault in Kernel32.DLL" when entering a decimal followed by cents in an amount field? 

How do I resolve the error, "QBW32 caused an invalid page fault in module unknown", when trying to open the company file? 
How do I resolve the message, "This file is already in use. Select a new name or close the file in use by another application." or "Another user is currently using this company file in single use mode. They must be in multi-user mode so you can also use this company file...", when trying to open or restore a file? 
How do I resolve the error, "QBW32 caused an invalid page fault in module unknown." when trying to open the company file? 
Why am I getting the warning, "This file was created with the Canadian version of QuickBooks", when opening a data file? 
Why do I get the error, "This data is from a newer version of QuickBooks. It cannot be used." when opening a company file in QuickBooks 6.0? 
What can I do when I get an error message and I can't get into QuickBooks or my data file? 
How do I resolve the message "You are about to close the current company file and open another company file named <filename>.qbw. Do you want to continue?" when opening my data file from Explorer? I don't have another company file open. 
How do I resolve the message "This filename is not valid" when creating a Timer data file? 
Why do I receive the message "Another user is currently using this company file from a different computer. You must ask them to close the company file before you can open it." when attempting to open or exit QuickBooks 6.0? 
Why am I receiving an unexpected error c=116, or an IPF in QBWRPT32, when restoring a backup from QuickBooks v4.0 for Macintosh to QuickBooks for Windows? 
Why do I get the message "This is the wrong type for this field" when trying to change the opening balance on any Balance Sheet account? 
Why do I get an Illegal Operation error message selecting ESC on the Write Checks screen? 
How do I resolve the message, "This transaction's date is prior to the closing date for this company file. Are you sure you want to make this change?" when recording any transaction? 
How do I resolve the error, "Account Not Found. Account is not in the Account List." when selecting a subaccount from the Account list? 
How do I resolve the message "The name cannot be Blank Please specify a name" when adding an income account in the Easy Step Interview? 
How do I resolve the error message "Error on line nn: Imported account has a duplicate account number." when importing a COA to an existing company file? 
How do I resolve the message, "Congratulations! Your version of ?.? is now up to date" after trying to update QuickBooks 6.0? 
How do I resolve the error message, "This field contains an invalid character"? 
Why do I get the warning message "You cannot use more than one A/R or A/P account in the same transaction" when making a General Journal entry? 
Why am I receiving a fatal error that contains the value C=88? 
Why do I get an error that contains the value C=44? 
Why do I get an error that contains the value C=43? 
Why do I get an error that contains the value C=1 when attempting to bring up any form? 
How do I resolve an error that contains the value C=272 when filtering Reports or using the Find command? 
How do I resolve the message "You may not have enough space on your hard drive to complete this backup." or an error that contains the value the value C=10 when backing up my data file? 
How do I resolve the message "This filename is not valid" when creating a Timer data file? 
How do I resolve the error message "QBW32.exe Exception- Access Violation or "QBW32 caused a stack fault in Kernel32.DLL" when entering a decimal followed by cents in an amount field? 
How do I resolve the error message "QBW32 caused a stack fault in Kernel32.DLL @ 0137-bff783e2 when tabbing from an amount field and using Windows 95? 
How do I resolve the error message "QBW32 caused an invalid page fault or invalid instruction in (module)." when importing a tab-delimited file into QuickBooks 6.0? 
Why does my computer system lockup or freeze when working in the QuickBooks for Windows program? 
How do I resolve the message " This account has been used for transactions. You cannot change the account type." when changing an account type from bank to any other type of account? 
Why do I get the error message, "Error 2049: session error" when connecting to a web site through QuickBooks 5.0, QuickBooks 6.0, or when accessing the QuickBooks Update Service? 

How do I resolve the error message "Error on line nn: Imported account has a duplicate account number." when importing a COA to an existing company file? 
How do I resolve an error that contains the value C=272 when filtering Reports or using the Find command? 
How do I resolve the error message "QBW caused a general protection fault (GPF) in module QFNOA16.dll at 0002:0000218a"? 
Why am I receiving an unexpected error c=116, or an IPF in QBWRPT32, when restoring a backup from QuickBooks 4.0 for Macintosh to QuickBooks for Windows? 
How do I resolve the message, "Qtour caused a GPF in VB40016.DLL@ 000a:000002a4," when clicking on the Overview icon in the QuickBooks program group? 
How do I resolve the error, "Warning - This account is the wrong type for this field. Please enter a different type account of the appropriate type for this field." when trying to edit a check from a bank account register? 
Why do I get an error that contains the value C=1 when attempting to bring up any form? 
How do I resolve the message "You may not have enough space on your hard drive to complete this backup." or an error that contains the value the value C=10 when backing up my data file? 
Why do I get an error that contains the value C=43? 
Why do I get an error that contains the value C=44? 
Why am I receiving a fatal error that contains the value C=88? 
Why do I resolve the error message, "This field contains an invalid character"? 
Why do I get the warning message "You cannot use more than one A/R or A/P account in the same transaction" when making a General Journal entry? 
Why do I get the error message, "Error 2049: session error" when connecting to a web site through QuickBooks 5.0, QuickBooks 6.0, or when accessing the QuickBooks Update Service? 
Why do I get the error message, "Error 4003 failed to get ini entry," when setting up an Internet connection? 
Why do I get the message, "Cannot find E:\Docw95\Articles.hlp file, check and see if file exists" when opening the Business Library or the Help menu? 
How do I resolve the message, "Your company data file was damaged in the last session and should not be used. Please contact Intuit Technical Support for instructions." when opening QuickBooks? 
How do I resolve the error, "Warning - This account is the wrong type for this field. Please enter a different type account of the appropriate type for this field." when trying to edit a check from a bank account register? 
Why am I receiving a "Fonts are missing" or "Fonts are not installed" message in QuickBooks? 
How do I resolve the error, "Insufficient memory"? 
What is a Windows General Protection Fault (GPF)? 
How do I check my available memory and resources in Windows 3.1 and in QuickBooks? 
What can I do when I get an error message and I can't get into QuickBooks or my data file? 
How do I resolve errors reading disks while installing QuickBooks? 
Why am I getting a fatal error that contains the value C=88? 
Why do I get an error that contains the value C=43? 
Why do I get an error that contains the value C=44? 
How do I resolve an error message with a value of C=225 followed by a GPF in QBPAY.DLL or QBTOOLS.DLL when paying employees? 
How do I resolve the error message, "This field contains an invalid character"? 
Why do I get a GPF in WINHELP.DLL, HPDJCO.DRV, or DESKJETC.DRV when printing from the EasyStep Interview or the "QuickBooks in your Industry" help documents? 
How do I resolve the error message, "QBW has caused a GPF in module QBFORMS.DLL." when I try to open the EasyStep Interview? 
How do I resolve error message, "QBW has caused a GPF in module QBFORMS.DLL" after I finish reconciling a credit card or adjusting a liability? 
How do I resolve the error message, "GPF in QBWIN.DLL" when trying to edit sales tax information in the EasyStep Interview? 
How do I resolve the error message, "QBW caused a GPF in module CXITL.DRV" when printing a "QuickBooks in Your Industry" document or from Help? 
Why do I get a GPF error in minst.exe or "unable to copy" minst.exe while installing QuickBooks? 
Why do I get an error that contains the value C=212 when attempting to open my company? 
Why do I receive a GPF error when I print or preview mailing labels? 
Why do I get the error message, "Warning! 117 (or 122)- Error String Not Found -- perrval.dll could be missing." when printing a Form 940 or 941? 
Why do I get the error message, "GPF in Module COMM95.DRV" and other communication errors when using HP OfficeJet Pro 1150C Printer-Copier-Scanner? 
Why do I get the message, "Annualized salary for employee exceeds the salary limit. Unable to calculate state and federal withholding taxes." when paying an employee? 
Why do I get the warning message "You cannot use more than one A/R or A/P account in the same transaction" when making a General Journal entry? 
Why do I get an error that contains the value C=1 when attempting to bring up any form? 
How do I resolve the error message "You may not have enough space on your hard drive to complete this backup." or an error that contains the value the value C=10 when backing up my data file? 


How do I resolve the message, "Your company data file was damaged in the last session and should not be used. Please contact Intuit Technical Support for instructions." when opening QuickBooks? 
How do I resolve the error, "Insufficient memory"? 
What is a Windows General Protection Fault (GPF)? 
How do I check my available memory and resources in Windows 3.1 and in QuickBooks? 
What can I do when I get an error message and I can't get into QuickBooks or my data file? 
How do I resolve errors reading disks while installing QuickBooks? 
How do I resolve the error message "You may not have enough space on your hard drive to complete this backup." or an error with the value C=10 when backing up my data file? 
Why do I get an error that contains the value C=43? 
Why do I get an error that contains the value C=44? 
Why am I getting a fatal error that contains the value C=88? 
How do I resolve an error message with a value of C=225 followed by a GPF in QBPAY.DLL or QBTOOLS.DLL when paying employees? 
Why do I get the message "This field contains an invalid character"? 
What should I do when I get "Cannot find file," or "Invalid path" errors when starting QuickBooks for the first time? 
Why do I get the warning message "You cannot use more than one A/R or A/P account in the same transaction" when making a General Journal entry? 
How do I resolve the message, "Your company data file was damaged in the last session and should not be used. Please contact Intuit Technical Support for instructions." when opening QuickBooks? 
How do I resolve the error, "Insufficient memory"? 
What is a Windows General Protection Fault (GPF)? 
How do I check my available memory and resources in Windows 3.1 and in QuickBooks? 
What can I do when I get an error message and I can't get into QuickBooks or my data file? 
How do I resolve errors reading disks while installing QuickBooks? 
Why am I getting a fatal error that contains the value C=88? 
Why do I get an error that contains the value C=43? 
Why do I get an error that contains the value C=44? 
How do I resolve the error message "You may not have enough space on your hard drive to complete this backup." or an error that contains the value the value C=10 when backing up my data file? 
How do I resolve the error message "This field contains an invalid character"? 
Why do I get the warning message "You cannot use more than one A/R or A/P account in the same transaction" when making a General Journal entry? 
How do I resolve the error, "Insufficient memory"? 
What is a Windows General Protection Fault (GPF)? 
How do I check my available memory and resources in Windows 3.1 and in QuickBooks? 
What can I do when I get an error message and I can't get into QuickBooks or my data file? 
How do I resolve errors reading disks while installing QuickBooks? 
Why am I getting a fatal error that contains the value C=88? 
Why do I get an error that contains the value C=43? 
Why do I get an error that contains the value C=44? 
How do I resolve the error message "You may not have enough space on your hard drive to complete this backup." or an error that contains the value the value C=10 when backing up my data file? 
How do I resolve the error message "This field contains an invalid character"? 
Why do I get the warning message "You cannot use more than one A/R or A/P account in the same transaction" when making a General Journal entry?

0  –631  RAISERROR executed: %1  
102  –171  Error opening cursor  
102  –199  INSERT/DELETE on cursor can modify only one table  
102  –933  A log is required for IQ databases  
102  –275  Triggers and procedures not supported in runtime server  
102  –273  COMMIT/ROLLBACK not allowed within trigger actions  
102  –131  Syntax error near '%1' %2  
102  –687  Syntax error, cannot specify IQ specific options without specifying IQ PATH  
102  –875  There is no way to join to '%1'  
102  –145  Foreign key name '%1' not found  
102  –271  Trigger definition conflicts with existing triggers  
102  –272  Invalid REFERENCES clause in trigger definition  
102  –635  GRANT of column permission on view not allowed  
102  –151  Subquery allowed only one select list item  
102  –269  Cannot delete or rename a column referenced in a trigger definition  
103  –250  Identifier '%1' too long  
104  –854  Function or column reference to '%1' in the ORDER BY clause is invalid  
108  –152  Invalid ORDER BY specification  
133  –262  Label '%1' not found  
134  –261  There is already a variable named '%1'  
137  –260  Variable '%1' not found  
154  –623  Data definition statements not allowed in procedures or triggers  
155  –200  Invalid option '%1' -- no PUBLIC setting exists  
174  –154  Wrong number of parameters to function '%1'  
176  –611  Transact-SQL feature not supported  
176  –148  Unknown function '%1'  
182  –159  Invalid column number  
201  –639  Parameter name missing in call to procedure '%1'  
201  –615  Parameter '%1' not found in procedure '%2'  
201  –737  Signature '%1' does not match procedure parameters  
205  –153  SELECT lists in UNION, INTERSECT or EXCEPT do not match in length  
207  –124  More columns are being dropped from table '%1' than are defined  
207  –143  Column '%1' not found  
208  –142  Correlation name '%1' not found  
209  –144  Column '%1' found in more than one table -- need a correlation name  
209  –163  Derived table '%1' has no name for column %2  
213  –207  Wrong number of values for INSERT  
217  –274  Procedure or trigger calls have nested too deeply  
220  –158  Value %1 out of range for destination  
230  –191  Cannot modify column '%1' in table '%2'  
230  –190  Cannot update an expression  
233  –195  Column '%1' in table '%2' cannot be NULL  
233  –733  Number of columns allowing NULLs exceeds limit  
257  –157  Cannot convert %1 to a %2  
257  –705  Return type of void from procedure '%1' cannot be used in any expression  
262  –121  Permission denied: %1  
264  –637  Duplicate insert column  
285  –708  READTEXT or WRITETEXT statement cannot refer to a view  
301  –147  There is more than one way to join '%1' to '%2'  
301  –680  Invalid expression in WHERE clause of Transact-SQL outer join  
301  –146  There is no way to join '%1' to '%2'  
305  –681  Invalid join type used with Transact-SQL outer join  
311  –295  Cannot uniquely identify rows in cursor  
314  –122  Operation would cause a group cycle  
315  –136  Table '%1' is in an outer join cycle  
315  –137  Table '%1' requires a unique correlation name  
401  –134  Feature '%1' not implemented  
401  –135  Language extension  
401  –156  Invalid expression near '%1'  
401  –994  Too many arguments for function or procedure '%1'  
404  –890  Statement size or complexity exceeds server limits  
409  109  Null value eliminated in aggregate function  
409  –90  Argument %1 of procedure '%2' cannot be null  
504  –265  Procedure '%1' not found  
509  –140  User ID '%1' does not exist  
512  –186  Subquery cannot return more than one row  
518  103  Invalid data conversion  
532  104  Row has been updated since last time read  
532  106  Value for column '%1' in table '%2' has changed  
538  –627  Disallowed language extension detected in syntax near '%1'  
546  –194  No primary key value for foreign key '%1' in table '%2'  
547  –198  Primary key for row in table '%1' is referenced by foreign key '%2' in table '%3'  
547  –677  Table '%1' has a foreign key with a referential action  
548  –196  Index '%1' for table '%2' would not be unique  
548  –209  Constraint '%1' violated: Invalid value for column '%2' in table '%3'  
549  –729  The specified foreign key (%1) can not be enforced  
550  –632  WITH CHECK OPTION violated for insert/update on base table '%1'  
553  –264  Wrong number of variables in FETCH  
554  –208  Row has changed since last read -- operation canceled  
557  –853  Cursor not in a valid state  
557  –170  Cursor has not been declared  
558  –172  Cursor already open  
559  –180  Cursor not open  
560  100  Row not found  
560  –197  No current row of cursor  
573  –738  Password must be at least %1 characters  
590  111  Statement cannot be executed  
601  –642  Invalid SQL descriptor name  
708  –80  Unable to start database server  
708  –86  Not enough memory to start  
708  –679  Not enough memory is allocated to the Java virtual machine for remote access  
709  –996  Specified local connection not found.  
710  –997  Specified local connection is not to the current database.  
711  –998  Cannot close a remote JDBC connection that is not the current connection.  
840  –82  Unable to start specified database: %1  
840  –87  Database name required to start server  
840  –1008  Unable to start specified database: '%1' is an invalid transaction log mirror  
840  –1009  Unable to start specified database: The transaction log '%1' or its mirror '%2' is invalid  
840  –1010  Unable to start specified database: '%1' not expecting any operations in transaction log  
840  –1011  Unable to start specified database: Unknown encryption algorithm.  
840  –1012  Unable to start specified database: '%1' must be upgraded to start with this server (capability %2 missing).  
840  –1013  Unable to start specified database: '%1' found, but database not found  
840  –1014  Unable to start specified database: '%1' is compressed -- use a write file or open in read-only mode  
840  –1015  Unable to start specified database: The database for write file '%1' has an incorrect modification time  
840  –1016  Unable to start specified database: Can't use log file '%1' since it has been used more recently than the database file  
840  –1017  Unable to start specified database: '%1': transaction log file not found  
840  –1018  Unable to start specified database: Can't use log file '%1' since the offsets don't match the offsets in the database file  
840  –1019  Unable to start specified database: Can't use log file '%1' since the database file has been used more recently  
840  –1020  Unable to start specified database: Can't use log file '%1' since it is shorter than expected  
840  –1004  Unable to start specified database: '%1' is not a database  
840  –1005  Unable to start specified database: '%1' was created by a different version of the software  
840  –1006  Unable to start specified database: '%1' is not a valid database file  
840  –1007  Unable to start specified database: '%1' is an invalid transaction log  
911  –83  Specified database not found  
924  –816  Specified database file already in use  
927  –97  Database page size too big  
927  –644  Invalid database page size  
928  –645  Database creation failed: %1  
932  –311  Internal rollback log corrupted  
950  –76  Request denied -- no active databases  
950  –74  The selected database is currently inactive  
1205  –306  Deadlock detected  
1205  –307  All threads are blocked  
1205  –684  Rollback occurred due to deadlock during prefetch  
1601  –102  Database server connection limit exceeded  
1602  –85  Communication error  
1602  –88  Client/server communications protocol version mismatch  
1702  –616  Too many columns in table  
1709  –849  Referential integrity actions other than RESTRICT not allowed for temporary tables  
1709  –850  Tables related by key constraint must both be permanent or both be temporary created with ON COMMIT PRESERVE ROWS  
1709  –865  Key constraint between temporary tables requires a primary key (not unique constraint)  
1719  –118  Table '%1' has no primary key  
1721  –113  Column '%1' in foreign key has a different definition than primary key  
1801  –77  Database name not unique  
1802  –138  Dbspace '%1' not found  
1909  –636  Duplicate referencing column  
1909  –119  Primary key column '%1' already defined  
1909  –251  Foreign key '%1' for table '%2' duplicates an existing foreign key  
1921  –111  Index name '%1' not unique  
1921  –678  Index name '%1' is ambiguous  
1923  –126  Table cannot have two primary keys  
1923  –112  Table already has a primary key  
2561  –106  Cannot open transaction log file -- %1  
2601  –193  Primary key for table '%1' is not unique  
2706  –141  Table '%1' not found  
2715  –613  User-defined type '%1' not found  
2727  –189  Unable to find in index '%1' for table '%2'  
2732  –296  Error number %1 for RAISERROR may not be less than 17000  
2748  –612  User message %1 not found  
2749  –294  Format string argument number %1 is invalid  
3013  –305  I/O error %1 -- transaction rolled back  
3013  –309  Memory error -- transaction rolled back  
3206  –240  Unknown backup operation  
3206  –241  Database backup not started  
3206  –242  Incomplete transactions prevent transaction log renaming  
3206  –1021  Invalid backup operation  
3451  –672  Database upgrade failed  
3451  –673  Database upgrade not possible  
3618  –302  Terminated by user -- transaction rolled back  
3618  –304  Disk full '%1' -- transaction rolled back  
3619  –107  Error writing to transaction log file  
3621  –299  Statement interrupted by user  
3702  –214  Table in use  
3702  –215  Procedure in use by '%1'  
3702  –750  User owns procedures in use  
3702  –751  User owns tables in use  
3819  –160  Can only describe a SELECT statement  
4001  –105  Database cannot be started -- %1  
4001  –84  Specified database is invalid  
4001  –72  No database file specified  
4002  –103  Invalid user ID or password  
4002  –103  Invalid user ID or password  
4002  –104  Invalid user ID or password on preprocessed module  
4224  –108  Connection not found  
4224  –99  Connections to database have been disabled  
4224  –308  Connection was terminated  
4406  –703  Cannot insert or update computed column '%1'  
4409  –114  Number of columns defined for the view does not match SELECT statement  
4412  –766  View references '%1', which is a temporary object. Views can only refer to permanent objects.  
4708  –702  TRUNCATE TABLE statement cannot refer to a view  
4901  –116  Table must be empty  
4939  –127  Cannot alter a column in an index  
5006  –604  A dbspace has reached its maximum file size  
5006  –605  The server attempted to access a page beyond the end of the maximum allowable dbspace file size  
5703  107  Language extension detected in syntax  
5849  –201  Invalid setting for option '%1'  
5864  –81  Invalid database server command line  
5864  –735  Invalid parameter  
5864  –79  Invalid local database switch  
5864  –95  Parse error: %1  
5864  –754  Parse error: %1  
5878  –204  Only the DBA can set the option '%1'  
5878  –216  The option '%1' can only be set as a temporary option  
5878  –217  The option '%1' cannot be set from within a procedure  
6001  –109  There are still active database connections  
6004  –75  Request to start/stop database denied  
6226  –183  Cannot find index named '%1'  
6259  –263  Invalid absolute or relative offset in FETCH  
6267  –814  Cannot update column '%1' since it appears in the ORDER BY clause.  
6401  –220  Savepoint '%1' not found  
7123  –608  Invalid TEXTPTR value used with WRITETEXT or READTEXT  
7139  –609  Invalid data type for column in WRITETEXT or READTEXT  
7201  –155  Invalid host variable  
7203  –89  Database server not running in multi-user mode  
7301  –192  Update operation attempted on non-updatable query  
7301  –813  FOR UPDATE has been incorrectly specified for a READ ONLY cursor.  
7321  –149  Function or column reference to '%1' must also appear in a GROUP BY  
7337  101  Value truncated  
7338  –728  Update operation attempted on non-updatable remote query  
7364  –139  More than one table is identified as '%1'  
7374  –676  The specified transaction isolation is invalid  
7705  –630  Invalid escape sequence '%1'  
7706  –606  The pattern is too long  
7707  –629  Invalid escape character '%1'  
7732  –633  Update operation attempted on a read-only cursor  
7740  –815  Cannot update column '%1' since it does not appear in the SELECT clause.  
7950  –100  Database server not found  
7950  –96  Database server already running  
8201  –640  Invalid descriptor index  
8205  –641  Error in assignment  
8405  –210  User '%1' has the row in '%2' locked  
9119  –78  Dynamic memory exhausted  
9502  –638  Right truncation of string data  
9526  –187  Illegal cursor operation attempt  
9819  –268  Trigger '%1' not found  
10356  –624  Expression has unsupported data type  
11205  –698  The remote server does not support an auto-incrementing data type  
11205  –732  Creating remote tables with computed columns is not supported  
11205  –736  The data type of column '%1' is not supported  
11206  –656  Unable to connect to server '%1': %2  
11207  –667  Could not access column information for the table '%1'  
11208  –722  The column '%1' does not exist in the remote table  
11209  –721  The data type specified for column '%1' is not compatible with the actual data type  
11210  –723  The length specified for column '%1' is different than the actual length  
11211  –724  Null attribute mismatch for column '%1'  
11212  –725  Identity attribute mismatch for column '%1'  
11214  –659  Remote server '%1' could not be found; Add the server using CREATE SERVER  
11214  –666  The remote table '%1' could not be found  
11215  –726  The table specification '%1' identifies more than one remote table  
11221  –712  External login for server '%1' could not be found  
11227  –706  Remote server does not have the ability to support this statement  
11248  –658  Remote server '%1' is currently configured as read only  
12006  –110  Item '%1' already exists  
13075  102  Using temporary table  
13204  –150  Invalid use of an aggregate function  
13482  –1028  Connection attempting BACKUP has uncommitted transactions  
13483  –1027  Service type does not allow '%1' attribute  
13484  –1026  USING attribute cannot coexist with FORMAT or GROUP attributes  
13485  –1025  Duplicate attribute '%1' in service  
13486  –1024  Unsupported property '%1' in service USING attribute  
13487  –1023  Missing value for attribute '%1' in service  
13488  –1022  Invalid value for attribute '%1' in service  
13489  137  Row was dropped from table %1 to maintain referential integrity  
13490  –1003  Too many distinct group mappings for integrated user  
13491  –1001  Parameter '%1' in procedure or function '%2' does not have a default value  
13492  –1000  Temporary space limit exceeded  
13493  –999  Invalid request log format on line %1  
13494  136  The database was created.  
13494  –1002  The option '%1' is not recognized.  
13495  –995  Warning detected when optimizing SELECT INTO is treated as an error  
13496  –993  LOAD TABLE not allowed on temporary table with ON COMMIT DELETE ROWS  
13497  –992  The specified listener could not be registered  
13498  –991  The %1 attribute '%2' is not valid  
13499  –990  The secure connection to the remote host failed  
13500  –989  NAMESPACE attribute is not valid with procedure type '%1'  
13501  –988  Invalid response from the HTTP server  
13502  –987  Invalid procedure subtype '%1' for type '%2'  
13503  –986  Invalid procedure type '%1'  
13504  –985  Could not load the encryption DLL '%1'  
13505  –984  Could not initialize the encryption DLL: '%1'  
13506  –983  HTTP request failed. Status code '%1'  
13507  –982  Connection timed out  
13508  –981  Unable to connect to the remote host specified by '%1'  
13509  –980  The URI '%1' is invalid  
13510  –979  Output file cannot be written  
13511  –978  Output file directory does not exist  
13512  –977  UltraLite runtime library is incompatible with the database file  
13513  –976  Could not load the encryption DLL "%1"  
13514  135  Compressed database is not encrypted  
13515  –973  The string is too long (%1)  
13516  –972  Database page size too small  
13517  –971  Checksums are not enabled in this database  
13518  134  UltraLite cursor (or result set or table) was restored  
13519  133  UltraLite connection was restored  
13520  –970  Invalid hint specified for table '%1'  
13521  –969  Required operators excluded  
13522  –968  User '%1' already has EXECUTE permission  
13523  –967  Backup file '%1' already exists  
13524  –966  Composite ORDER BY not allowed with RANGE  
13525  –965  Window function requires ORDER BY  
13526  –964  Window function used in predicate  
13527  –962  Argument to GROUPING aggregate must be a grouping column in the GROUP BY clause  
13528  –963  Password contains an illegal character  
13528  –961  Input string is not base64-encoded  
13529  –959  Compression error: %1  
13530  –958  Password cannot be longer than %1 characters  
13530  –960  Decompression error: %1  
13531  –957  Invalid preceding or following size in OLAP function  
13532  –956  Information for synchronization is incomplete or invalid, check '%1'  
13533  –955  This connection already exists  
13534  –954  The database '%1' was not found  
13535  –953  A schema upgrade is not currently allowed  
13536  –952  The status of the last synchronization upload is unknown  
13537  –951  Cannot access schema file '%1'  
13538  –950  Frame not allowed for window '%1'  
13539  –949  ORDER BY not allowed in window '%1'  
13540  –948  PARTITION BY not allowed in reference to window '%1'  
13541  –947  Window '%1' not found  
13542  –946  Result set not permitted in '%1'  
13543  –945  Recursive column %1: conversion from '%2' to '%3' loses precision  
13544  –944  Too many expressions in GROUP BY list for ROLLUP, CUBE, or GROUPING SETS operation.  
13545  –943  No workload capture currently exists  
13546  –942  A workload capture (%1) is already in progress  
13547  –940  Invalid setting for HTTP header '%1'  
13548  –941  jConnect does not support encryption  
13548  –939  Invalid setting for HTTP option '%1'  
13549  –938  Recursion is not allowed without the RECURSIVE keyword  
13550  –937  Invalid reference to or operation on constraint '%1'  
13551  –936  too many constraints in database  
13552  –934  Unable to start specified database: Server must be upgraded to start database %1  
13553  –935  Unable to start specified database: Log file error  
13554  –931  Service definition requires a statement when authorization is off  
13555  –930  (no message)  
13556  –929  Constraint '%1' not found  
13557  –928  Constant expressions may not appear in GROUP BY clause  
13558  –927  Service statement definition is inconsistent with service type  
13559  –926  Host variable reference in service definition must be named  
13560  –925  Invalid service name '%1'  
13561  –923  Too many recursive iterations  
13562  –922  No column list for recursive query  
13563  –921  Invalid recursive query  
13564  –920  Service '%1' not found  
13565  –919  Service '%1' already exists  
13566  –918  A user name must be specified if AUTHORIZATION is OFF  
13567  –924  Service '%1' in use  
13568  –916  '%1' is an unrecognized service type  
13569  –915  Service type required for CREATE SERVICE  
13570  –914  Cycle in common table expression references  
13571  –913  A transaction log file is required for auditing  
13572  –912  Insufficient memory for OPENXML query  
13573  –911  Control character in XML output  
13574  –910  System command failed with return code %1  
13575  –908  Invalid operation on a closed '%1'  
13576  –907  No name for argument  
13577  –906  XMLGEN evaluation failure  
13578  –905  Invalid XQuery constructor  
13579  –904  Illegal ORDER BY in aggregate function  
13580  –901  Undeclared tag id: '%1'  
13580  –903  CDATA has a name  
13581  –900  Parent not open: '%1'  
13581  –902  Too few columns  
13582  –899  Illegal column name: '%1'  
13583  –898  Unknown FOR XML EXPLICIT directive: '%1'  
13584  –897  Illegal FOR XML EXPLICIT tag value: '%1'  
13585  132  Cannot output the histogram for string column '%1'  
13587  –896  Cannot delete PUBLIC option '%1' since user settings exist  
13588  130  A row could not be converted to the new schema format  
13589  –895  Encryption error: %1  
13589  –894  Plan can not be generated for this type of statement  
13590  –893  Illegal flags value passed to OPENXML  
13591  –892  XPath parser error: %1  
13592  –891  Cannot convert between requested character sets '%1' and '%2'  
13593  –657  Unable to connect to server '%1': server definition is circular  
13594  –889  Statement contains an illegal usage of the non-deterministic function '%1'  
13595  –888  XML parser error: %1  
13596  129  Plan may contain virtual indexes.  
13597  –887  Virtual index creation with more than %1 columns.  
13600  0  (no message)  
13601  –690  Return value cannot be set  
13602  –693  JDBC feature '%1' not supported  
13603  –694  Could not change an opened prepared statement or callable statement  
13604  –695  An internal error occurred in a '%1'  
13605  –696  Invalid operation on a closed '%1'  
13606  –699  Cannot update member fields qualified with "final" modifier  
13607  –701  Cannot access instance member through a class  
13608  –713  An internal error occurred in a '%1'  
13609  –714  Invalid operation on a closed '%1'  
13613  114  Character set translation to '%1' cannot be performed; '%2' is used instead  
13614  115  Database server cannot convert data from/to character set '%1', conversion may not be correct  
13615  116  Language '%1' is not supported, '%2' will be used  
13616  117  Unsupported character set '%1' and unsupported language '%2'; language used is '%3' instead  
13617  118  Illegal user selectivity estimate specified  
13618  105  Procedure has completed  
13619  200  Warning: %1  
13620  –98  Authentication violation  
13621  –218  Authentication failed  
13622  –101  Not connected to a database  
13623  –125  ALTER clause conflict  
13624  –610  User message %1 already exists  
13625  –120  User '%1' already has GRANT permission  
13626  –123  User '%1' is not a user group  
13627  –312  User '%1' already has membership in group '%2'  
13628  –130  Invalid statement  
13629  –132  SQL statement error  
13630  –133  Invalid prepared statement type  
13631  –707  Statement is not allowed in passthrough mode  
13632  –614  Cannot drop a user that owns messages or data types  
13633  –731  Cannot drop a user that owns objects involved in replication  
13634  –161  Invalid type on DESCRIBE statement  
13635  –181  No indicator variable provided for NULL result  
13636  –182  Not enough fields allocated in SQLDA  
13637  –185  SELECT returns more than one row  
13638  –188  Not enough values for host variables  
13639  –266  %1  
13640  –267  COMMIT/ROLLBACK not allowed within atomic operation  
13641  –270  Cannot drop a user that owns procedures in runtime server  
13642  –280  Publication '%1' not found  
13643  –281  Table '%1' has publications  
13644  –282  Subscription to '%1' for '%2' already exists  
13645  –283  Subscription to '%1' for '%2' not found  
13646  –284  User '%1' is already the publisher for this database  
13647  –285  User '%1' is not a remote user for this database  
13648  –286  Remote message type '%1' not found  
13649  –287  Passthrough statement inconsistent with current passthrough  
13650  –288  Remote statement failed  
13652  –211  Not allowed while '%1' is using the database  
13653  –212  CHECKPOINT statement requires a rollback log  
13654  –221  ROLLBACK TO SAVEPOINT not allowed  
13655  –222  Result set not allowed from within an atomic compound statement  
13656  –213  Savepoints require a rollback log  
13657  –230  Sqlpp/dblib version mismatch  
13658  –231  Client/database server version mismatch  
13660  –243  Unable to delete database file  
13661  –244  Transaction log was truncated  
13662  –297  User-defined exception signaled  
13663  –298  Attempted two active database requests  
13664  –300  Run time SQL error -- %1  
13665  –301  Internal database error %1 -- transaction rolled back  
13666  –310  Attempt to read beyond end-of-file in a compressed database  
13669  –601  '%1' is not a known file format for loading or unloading tables  
13670  –602  Cannot access file '%1' -- %2  
13672  –643  UNLOAD TABLE cannot be used to unload a view  
13673  –607  Cannot stop the database server  
13674  –617  Calling functions outside the database server is not supported  
13675  –618  Mismatch between external function platform specifier and current operating system  
13676  –619  Need a dynamic library name  
13677  –620  Could not load dynamic library '%1'  
13678  –621  Could not find '%1' in dynamic library '%2'  
13679  –622  Could not allocate resources to call external function  
13680  –625  Too many parameters to this external procedure call  
13681  –626  A thread used internally could not be started  
13682  –634  Unterminated C string  
13683  110  Transaction log backup page only partially full  
13685  –202  Only PUBLIC settings are allowed for option '%1'  
13686  112  More information required  
13687  –203  Cannot set a temporary option for user '%1'  
13688  113  Database option '%1' for user '%2' has an invalid setting  
13689  –205  Integrated logins are not permitted  
13690  –206  Integrated logins are required, standard logins are not permitted  
13691  –245  Integrated login failed  
13692  –503  (no message)  
13693  –504  (no message)  
13694  –246  Integrated logins are not supported for this database  
13695  –247  The integrated login ID guest can only be mapped to the guest database user ID  
13696  –248  Cannot map a login ID to the sys or public user ID  
13697  –249  The login ID '%1' is already mapped to user ID '%2'  
13698  –313  The login ID '%1' has not been mapped to any database user ID  
13699  –646  Could not load the store DLL "%1"  
13700  –647  Could not execute store DLL (%1) entry point.  
13701  –711  Incorrect store DLL (%1) version.  
13702  –648  Cannot create item (%1) in the specified dbspace.  
13703  –93  Class '%1' has no public field '%2'  
13704  –650  Index type specification of '%1' is invalid  
13705  –651  An attempt to delete database '%1' failed  
13706  –654  The connection parameters file could not be found  
13707  –655  Error parsing connection parameter string  
13708  –664  Database is active  
13709  –665  Database "%1" needs recovery  
13710  –668  Cursor is restricted to FETCH NEXT operations  
13711  –669  Method '%1' cannot be called at this time  
13712  –671  Parameter not registered as output parameter  
13713  –674  statement's size limit is invalid.  
13714  –683  The cursor name '%1' already exists  
13715  –685  Resource governor for '%1' exceeded  
13717  –689  Input parameter index out of range  
13718  –691  Could not load the backup/restore DLL "%1"  
13719  –692  Could not execute backup/restore DLL (%1) entry point.  
13720  –697  Error during backup: %1  
13721  –700  SQLDA fields inconsistent for a multi-row SQLDA  
13722  –709  Computed columns are not supported in this database  
13723  –761  Server capability name '%1' could not be found in the SYS.SYSCAPABILITYNAME table.  
13724  –715  Contents of backup files are inconsistent  
13725  –716  Backup file format is invalid  
13726  –717  RESTORE unable to open file '%1'  
13727  –718  RESTORE unable to write to file '%1'  
13728  –719  RESTORE unable to start database '%1'  
13729  –720  VALIDATE TABLE statement must refer to a base table  
13730  –727  The optimizer was unable to construct a valid access plan  
13731  –128  Cannot drop a user that owns tables in runtime system  
13732  –660  Server '%1': %2  
13733  –661  Backwards scrolling cursors are not supported for remote objects  
13734  –682  %1  
13735  –91  Procedure '%1' terminated with unhandled exception '%2'  
13736  –92  '%1' is not a valid class file  
13737  –730  Invalid jar file  
13738  –94  Invalid type for field reference  
13739  –164  Namespace heap exhausted at internal function: %1  
13740  –165  Java VM heap exhausted at internal function: %1  
13741  –649  Field '%1' of class '%2' cannot be null  
13742  –652  Could not decompress class '%1' from Jar.  
13743  –653  Cannot remove class '%1': member of Jar  
13744  –662  Cannot serialize Java object with class '%1'  
13745  –663  Cannot deserialize Java object  
13746  –670  Invalid class byte code  
13747  –675  Java virtual machine could not be started  
13748  –704  Cannot create an index on Java class '%1'  
13749  –710  Invalid comparison  
13750  –734  Cannot update or delete an all-NULL row from table '%1'  
13751  120  '%1' is an unknown option  
13752  –739  db_init has not been called or the call to db_init failed  
13753  –740  The communications environment could not be created  
13755  –742  JDBC SAStatement batch execute abandoned  
13756  –743  Seek absolute 0 was attempted on a JDBC SAResultSet  
13757  –744  Invalid IQ database command line option or parameter value: %1  
13758  –745  Cannot initialize IQ memory manager: %1  
13759  –746  Cannot allocate System V resources  
13760  –747  Invalid JDBC resultset type  
13761  –748  Invalid JDBC resultset concurrency  
13762  –749  Feature not available with UltraLite  
13763  –752  Cannot call the '%1' function on a JDBC resultset when it is positioned on an insert row  
13764  –753  The JDBC resultset must be positioned on an insert row in order to use the '%1' function  
13765  –755  You cannot synchronize or upgrade with uncommitted transactions  
13766  –756  Cannot uniquely identify column '%2' of table '%1' in the current JDBC resultset  
13767  –289  Multiple consolidated users cannot be defined  
13768  –757  Modifications not permitted for read-only database  
13769  –758  The database does not support the Java virtual machine  
13770  –759  SQLDA data type invalid  
13771  –760  Invalid SQL identifier  
13772  –762  '%1' is not a public Java class, and cannot be referenced from SQL  
13773  –763  '%1' is not a public Java reference, and cannot be referenced from SQL  
13774  –764  Server not found and unable to autostart  
13775  –765  Synchronization message type '%1' not found  
13776  119  Unable to open backup log '%1'  
13777  –767  Cannot find synchronization subscription with the name '%1'  
13778  –768  Cannot subscribe to '%1'  
13779  –769  Cannot modify synchronization entry using ALTER PUBLICATION  
13780  –770  Cannot modify publication entry using ALTER SYNCHRONIZATION  
13781  –771  Event '%1' not found  
13782  –772  Event '%1' already exists  
13783  –773  Schedule '%1' for event '%2' not found  
13784  –774  Schedule '%1' for event '%2' already exists  
13787  –777  Cannot synchronize table '%1' since it does not have a primary key  
13788  –778  Must include primary key for table '%1' in the synchronization  
13789  –779  Cannot create synchronization entry for table '%1' with BLOB primary key  
13790  –780  Cannot update primary key for table '%1' involved in a publication  
13792  –782  Cannot register '%1' since another exclusive instance is running  
13793  –783  Cannot register another '%1' as an exclusive application  
13794  –784  Cannot register connection because of invalid application cookie  
13795  –785  Cannot deregister application because of invalid cookie  
13796  –786  Cannot deregister '%1' since active registered connection exists  
13797  –787  Current connection is already registered to '%1' as '%2'  
13798  –788  Another connection has already registered as '%1'  
13799  –789  Cannot register '%1' since registration cookie exhausted  
13800  –790  Cannot register connection to '%1' since automatic label exhausted  
13801  –791  Invalid day of week or month '%1' for event '%2'  
13802  –792  Invalid time '%1' for event '%2'  
13803  –793  Invalid start date/time for event '%1'  
13804  –794  Synchronization server failed to commit the upload  
13805  –795  Undefined synchronization template '%1'  
13806  –796  Synchronization site '%1' is already defined  
13807  –797  Synchronization option '%1' contains semi-colon, equal sign or curly brace  
13809  –799  DTC transactions are not supported on this platform  
13810  –800  Cannot commit or rollback while enlisted in a transaction  
13811  –801  Cannot enlist in a transaction while already enlisted in a transaction  
13812  –802  Cannot enlist in a transaction with uncommitted data pending  
13813  –803  Unable to enlist transaction; DTC may be down  
13814  –804  Unable to reenlist transaction; DTC may be down  
13815  –805  Synchronization option '%1' not found  
13816  –806  System event type '%1' not found  
13817  –807  Host variables may not be used within a batch  
13818  –808  An internal error was generated by the test harness  
13819  –809  Synchronization option is too long  
13820  –810  Java class '%1' not found  
13821  –811  Jar '%1' not found  
13822  –812  The Select list for the derived table '%1' has no expression to match '%2'  
13823  –817  too many temporary tables in connection  
13824  –818  The external function call is incompatible  
13825  –819  Table '%1' is part of a synchronization definition  
13826  –820  Invalid scroll position '%1'  
13827  –821  Dbspace for table '%1' not found  
13828  –822  Table '%1' is already included  
13829  –823  OMNI cannot handle expressions involving remote tables inside stored procedures  
13830  –824  Illegal reference to correlation name '%1'  
13831  –825  Previous error lost prior to RESIGNAL  
13832  –826  Database upgrade not possible; RowGenerator table not owned by user dbo  
13833  –827  Database upgrade not possible; user tables have table ids in system table range  
13834  –828  A conflict with the DBMLSync download phase was detected  
13835  –829  TLS handshake failure  
13836  –830  Alias '%1' is not unique  
13837  –831  Definition for alias '%1' must appear before its first reference  
13838  –832  Connection error: %1  
13839  –833  Row in table '%1' was modified or deleted in BEFORE trigger  
13840  –834  Column '%1' not found in table '%2'  
13841  –835  Event '%1' in use  
13842  –836  Procedure '%1' is no longer valid  
13843  –837  Trigger or foreign key for table '%1' is no longer valid  
13844  –838  TLS initialization on server failed  
13845  –839  Download failed because of conflicts with existing rows.  
13847  –841  The JDK version in '%1' does not match '%2'  
13848  –842  JDK '%1' is not a supported JDK  
13849  –843  Cannot find synchronization user with the name '%1'  
13850  –844  Cannot find synchronization definition with the name '%1'  
13851  –845  Owner '%1' used in a qualified column reference does not match correlation name '%2'  
13852  –846  Set clause for column '%1' used incorrectly  
13853  –847  Java SecurityManager class not found: %1  
13854  –848  Exception occurred while loading Java SecurityManager  
13855  –851  Decryption error: %1  
13856  –852  Table name '%1' is ambiguous  
13857  121  Cursor option values changed  
13858  –855  Trigger name '%1' is ambiguous  
13859  –856  Invalid sqllen field in SQLDA  
13860  –857  Synchronization failed due to an error on the server: %1  
13861  –858  CREATE/DROP STATISTICS statement cannot refer to virtual tables  
13863  –859  %1  
13864  –860  At least one of the specified dbspaces was not calibrated.  
13865  –861  Aggregated expression '%1' contains multiple columns of which one or more are outer references  
13866  –862  The aggregate expression '%1' must appear in either the select list or a HAVING clause subquery  
13867  –863  Grouped query contains more than one distinct aggregate function  
13868  –303  Disk write failure '%1' -- transaction rolled back  
13869  –864  Statement contains an illegal usage of the NUMBER(*) function  
13870  –866  %1 returned a result set with a different schema than expected  
13871  –867  Cannot change synchronization user_name when status of the last upload is unknown.  
13872  –868  '%1' is an unknown character set label  
13873  –869  Database server cannot convert data from/to character set '%1'  
13874  –870  Cannot convert between requested character set '%1' and database character set '%2'  
13875  –871  The database needs to be restarted for this Java related command  
13876  –872  %1 does not return a result set  
13877  –873  %1 returned multiple result sets  
13878  –686  Insufficient cache to start Java virtual machine  
13879  –688  Strongly-encrypted database files are not supported in the runtime server  
13880  –874  Column must be named: %1  
13882  –876  Client out of memory  
13883  122  The result returned is non-deterministic.  
13884  123  Database created without any schema  
13885  –184  Column '%1' in table '%2' cannot be NULL. The invalid data was supplied to load table in a data file on line %3.  
13886  124  Invalid data conversion: NULL was inserted for column '%1' on row %2.  
13887  –162  Cannot convert %1 to a %2. The bad value was supplied for column '%3' on row %4 of the data file.  
13888  –877  SETUSER not allowed in procedures, triggers, events or batches  
13889  –878  Index '%1' can not be clustered  
13890  –879  An invalid multi-byte input character was encountered  
13891  –880  An invalid multi-byte output character was encountered  
13892  125  An invalid multi-byte input character was encountered  
13893  126  An invalid multi-byte output character was encountered  
13894  –881  An input character could not be converted to database character set  
13895  –882  An output character could not be converted to the application character set  
13896  127  An input character could not be converted to database character set and simple substitution took place  
13897  128  An output character could not be converted to the application character set and simple substitution took place  
13898  –883  Character conversion reporting is not available when the single byte converter is used  
13959  –974  File I/O failed for '%1'  
13960  –975  Incorrect volume ID for '%1'  
16846  –840  Incorrect or missing encryption key  
36007  –628  Division by zero

Quickbooks Damaged or Corrupted File Recovery Rates

Quickbooks Expedited Data Recovery:

  • Turnaround time is 8-12 hours.
  • US$449 flat fee
  • Guaranteed success, or no charge
        Buy Quickbooks Expedited Data Recovery Service
(using PayPal)

Quickbooks Standard Data Recovery:

  • Turnaround time is 48 hours
  • US$275 flat fee
  • Guaranteed success, or no charge
        Buy Quickbooks Standard Data Recovery Service
(using PayPal)
If you don't see your problem listed above and want to know if we can fix it before sending your data, please send us an email describing your problem to support@filerepair.net and we will get back to you ASAP.
To send us your data file for a Free no-obligation quote, please use the link below
Free QuickBooks Data Recovery Evaluation


Recovery Procedure:

  1. After paying for the service, we will send you FTP instructions to send us the corrupted or damaged data file for recovery. For Quickbooks 2006 and higher recoveries, it is important to send us both the QBW and TLG file as well as ANY older backup of the Quickbooks data file (QBW or QBB).
  2. We will analyse your files and send you an analysis report detailing exactly what can be recovered and what cannot be recovered. (In most cases we can recover everything without any data loss).
  3. At this point you can choose either to go ahead with the recovery or cancel the recovery request.*
  4. If you cancel the request, your payment will be refunded in full.
  5. If you decide to go ahead with recovery, you will receive an email with instructions to download the recovered data file.
*Note: For prepaid customers, if your file can be repaired without any data loss, you will receive the repaired file as soon as recovery is completed. 

ฉ Copyright www.e-tech.ca 2002-2010. All Rights Reserved. Sitemap.
E-Tech Corporation | E-Tech Data Recovery| E-Tech Research | Quickbooks Conversion | Quickbooks Connector | Quickbooks Recovery UK | Quickbooks Recovery Canada | Quickbooks Data Recovery

EMERGENCY RECOVERY SERVICE

Do you have a Corrupt Database or are unable to open a data file? We provide a recovery service that's guaranteed to repair your database. We have provided this service to big name companies like the US Army, American Express, AOL, AT&T, Air Canada etc. and you get the same guaranteed service. This includes telephone support if needed. We guarantee 100% satisfaction!

More info ป


PASSWORD AND DAMAGED FILE RECOVERY

We can recover damaged or corrupted data files and passwords from files of most formats. Please zip and FTP your file to us by clicking here.
You do not pay if we cannot recover your password or recover your damaged file.

More info ป


Testimonials

"Our client had a few access database that needed recovery since the workgroup file got corrupted. ETechRecovery's 'Remove Access Security' gave us access to all our databases without a problem. Also email support was great!" -- Van Rensberg, Icon Medialab

"Excellent software and support. I will not hesitate recommending E-Tech Recovery to all my clients" -- Gary Fischer, ACC